Beşköprü, 116. Sk. No:20/B, Ortaca We're open now · Mon–Fri 08:30–19:00 · Sat 09:00–17:00
Request a Free Survey 0554 965 5558 WhatsApp

Mon–Fri 08:30–19:00 · Sat 09:00–17:00

Low-E Comfort Double Glazing

Low-E double glazing with an invisible metal oxide coating keeps heat inside in winter, while the solar control version reduces summer heat gain. The most efficient glass choice for Ortaca’s hot summers.

Low-E Comfort Double Glazing – Ortaca

Key advantages

  • Lower heat loss than standard double glazing
  • Cooler summers with the solar control version
  • Savings on air-conditioning and heating
  • Less condensation
  • Less UV fading
  • Fits existing joinery without changing profiles

Low-E (low emissivity) comfort double glazing is produced by applying a very thin, invisible metal oxide layer to the inner surface of one pane in the unit. This coating lets daylight through freely while reflecting long-wave heat radiation, so heat inside the home does not escape in winter. In solar control versions, a large share of the sun’s heat energy is also kept outside.

Where Is It Used?

It is the best choice for south and west facing living room and bedroom windows, wide sliding and lift-and-slide systems, winter gardens and double-glazed glass balconies. On facades catching the afternoon sun in Ortaca, Dalaman and Sarıgerme, it limits overheating and reduces air-conditioning use.

Advantages

  • Significantly lower heat loss than standard double glazing.
  • A cooler interior in summer with the solar control version.
  • Savings on air-conditioning and heating.
  • Less condensation because the glass surface stays warmer.
  • Reduced UV rays that fade furniture and curtains.
  • Natural appearance; the coating is not visible.

Technical Information

The Ug value of Low-E double glazing ranges from 1.0 to 1.6 W/m²K depending on cavity fill and coating type. Filling the cavity with argon gas improves insulation further. In solar control + Low-E combinations the solar energy transmittance (g value) drops to about 0.30–0.45, meaning noticeably less heat enters in summer. Light transmittance remains high, so rooms do not become dark.

Sizes and Installation

Because Low-E double glazing can be made in the same size and thickness as standard units, it can be fitted to existing PVC and aluminium windows without changing the profile. During installation it is important that the coated surface faces the correct side; the production label is checked for this.

Maintenance

As the coating sits between the panes, it is not damaged during cleaning; ordinary glass cleaner can be used. During the free survey and measurement we plan together which windows should have solar control glass and which standard Low-E, based on the direction your facades face.

Frequently asked questions

No, in most cases you do not. Mist between the two panes shows that the glass unit has lost its seal; this cannot be fixed by wiping the glass. If the window frame and sash are sound, only the double glazed unit is remade to size and replaced. This is much more economical than replacing the whole window and is usually done in a few hours. During replacement you can also improve insulation by choosing low-E coated glass. After measuring, a new glass unit is made and on installation day the old glass is removed and the new one fitted.

Tempered glass is heat-treated to be much stronger than normal glass; when broken, it shatters into small blunt pieces instead of sharp shards. It is used in glass balconies, shower enclosures and door glazing. Laminated glass consists of two panes bonded with a special film; when broken, the pieces stay attached to the film. It is preferred where safety, impact resistance and sound insulation are needed, for example in homes near the airport or large panes close to floor level. Both glass types can also be combined in a single double glazed unit.

Other Double Glazing and Glass Systems types

Double Glazing and Glass Systems
Double Glazing (4+16+4)

Double Glazing (4+16+4)

A standard 4+16+4 double glazed unit with a 16 mm air cavity between two panes. The basic insulating glass for...

PriceDetermined at survey
Laminated Safety Glass

Laminated Safety Glass

Laminated safety glass with a PVB interlayer between two panes that does not shatter when broken. Provides saf...

PriceDetermined at survey
Glass Replacement

Glass Replacement

Broken, cracked or fogged glass in existing PVC and aluminium joinery is measured on site and replaced. An eco...

PriceDetermined at survey

Free Measuring and Survey

We'll come to your address, take measurements and show you colour and system options on site. We'll send your quote the same day.